Intel X550-T2 based NIC PCIe 3.0 x8 Dual Port 10GbE RJ45
Buy through a distribution partner
Powered by
Intel X550-T2 based NIC PCIe 3.0 x8 Dual Port 10GbE RJ45
Intel X550-T2 based NIC PCIe 3.0 x8 Dual Port 10GbE RJ45
The X550 is a low-cost option for deploying 10GbE in your data center because it uses CAT6 and CAT6A cabling - standard cabling for many data centers. Auto negotiation between 1GbE, 2.5GbE, 5GbE, and 10GbE provides the necessary backwards compatibility required for a smooth transition and easy migration to 10GbE Copper cabling's flexible reach from 1 meter to 100 meters also supports Top of Rack (ToR), Middle of Row (MoR), and End of Row (EoR) network architectures.
- PCI Express* (PCIe*) v 3.0 with up to 8.0 GT/s.
- Low cost, low power, 10 GbE performance for the entire datacenter
- Intel second generation, single- and dual-port 10GBASE-T controller with integrated MAC and PHY.
- Standard CAT 6a cabling with RJ45 connectors. Supports NBASE-T* technology (2.5 and 5.0 GbE over CAT 5e)1.
- Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10 GbE.
- Unified networking delivering LAN, iSCSI and FCoE in one low-cost CNA.
- Flexible I/O virtualization for port partitioning and Quality of Service (QoS) of up to 64 virtual ports.
- Reliable, proven 10 GbE technology from Intel Corporation.
System Requirements
Windows Client: Windows 11/10/8.1/8/7
Windows Sever: 2008 R2/2012/2012 R2/2016/2019/2022
Linux: RHEL7.9/8.4/8.5, SLES12SP5, SLES15SP3, Ubuntu18.04LTS/20.04LTS, FreeBSD 12.2/13
Specification
- PCI-Express host interface specification v3.0
- Complies with PCI Bus Power Management Interface Specification Rev1.2
- PCI-Express lanes: x 8
- Complies with dual port 10GbE RJ45 copper port
- Operate Speeds: 10Gb/s, 5Gb/s, 2.5Gb/s, 1Gb/s, 100Mb/s
- 10GBASE-T as per the IEEE 802.3an standard
- 1000BASE-T and 100BASE-TX as per the IEEE Standard 802.3-2012
- NBASE-T as per the IEEE P802.3bz/D1.1 Draft Standard for Ethernet Amendment
- Half duplex at 10/100Mbp operation and full duplex operation at all supported speeds
- Layer 2 functions: IEEE 802.3x Flow Control - IEEE 802.1q VLAN
- Supports Receive-side scaling (RSS)
- Supports IPv 4, IPv 6 protocols
- Supports Jumbo Frames up to 15.5K
- Supports UDP.TCP and IP Checksum offloading
- 128 transmit queues
- Statistics for management and RMON
- Support for 64 virtual machines per port (64VMs x2 queues)
- Support for Data Center Bridging(DCB) (802.1Qaz, 802.1Qbb, 802.1p)
- Interrupt throttling control to limit maximum interrupt rate and improve CPU usage
-
Connector Type
-
Data Rate
-
Media
-
Storage Temperature
-
Bracket Height
-
Bus Type
-
Bus Width
-
Chipset
-
Protocol
-
Link Rate
-
Number of Ports
-
Compatible OEM
-
Operating Temperature Range
-
Safety & Environmental Standards
-
Warranty
-
Dimensions
-
ECCN
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Shipping
What does the suffix ‘-C’ mean in our part numbers?
What does the suffix ‘-C’ mean in our part numbers?
We are frequently asked what the suffix ‘-C’ means in our part numbers.
Simply put, the ‘-C’ means that our product is a Compatible version of the Original Equipment Manufacturer (OEM) part number.
For example
Cisco® Part Number: SFP-10G-SR
ATGBICS® Part Number: SFP-10G-SR-C
This method of part numbering gives our clients the assurance that they will be supplied the fully tested, 100% compatible, MSA Compliant version of the OEM part.
What does MSA Compliant mean?
Multi-Source Agreement (MSA) is a multi-vendor specification that defines the form factors and interfaces of an optical transceiver. Manufacturers adhere to MSAs to ensure interoperability and interchangeability between interface modules. This enables compatible manufacturers such as ATGBICS to provide compatible solutions to the same specification as the OEM.
With the assurance of quality, reliability and compatibility, our clients are reaping the benefits of buying compatible alternatives to OEM with significant cost savings, shorter lead times and exemplary customer service.
In short you can be sure that all our products are:
- 100% Compatible
- Fully Tested
- Backed By A Lifetime Warranty
- Conform To ALL Industry Standards & Protocols
- Each Product Uniquely Serialised And Traceable
- Up to 90% cheaper than the OEM alternative but equal in performance & reliability
- With lead times of days not weeks or months
- Easy to ensure compatibility. Our SKUs are equivalent to the OEM SKU suffixed with ‘-C’ to denote ‘compatible’
How long will it take to receive my order?
How long will it take to receive my order?
Standard shipping normally takes 3-5 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).
